nba让分推荐

液压凿岩台车系列(介绍)
发布时间: 2016-06-21 15:42   点击次数:   【返回列表】

液压凿岩台车
Hydraulic Drilling Machine

 

集动力、凿岩、行走、排渣和集尘于一体的机电液一体化专业施工最新设备。

与国外同类机型相比,具有轻型化设计、性能卓越可靠、操作简单、配套施工服务方案完善、维修方便、成本较低等优点,广泛用于大理石、花岗岩、金属矿、非金属矿和煤矿等开采凿岩与地质勘探、深坑巷道掘进以及采石,水电站、铁路、高速公路、港口、国防工程等基础设施施工中钻凿炮眼,还可用于城市拆除旧建筑物和控制爆破以及军队人防工程、战时工事等。
The newest project equipment integrated power, drilling, walking and slagging as a whole. Compared to the same type of products abroad, it has the advantages of light weight, excellent performance, reliable, perfect construction service projects, easy to operate and repair, Widely used in marble, granites, metal mine, non-metal mine, coal mine, as well as in hydroelectric projects, high way ports and national defense construction etc. infrastructure construction drilling blasthole. It can also be used for demolition of old buildings in cities, controlling of blasting, army defense projects and other wartime fortifications.
领先优势
1、一体化功能,施工一气呵成
集动力、凿岩、行走、排渣和集尘等设备于一体,功能完备多样,作业灵活便捷,有效提高工作效率。
2、全液压作业,全天候攻坚
国内领先的全液压工作系统,全方位满足露天作业与井下、巷道作业。
3、多角度钻孔,挑战作业的空间极限
可自行行走,钻臂多形式组合,可前后、上下、左右移动,实现在三维空间任意角度的钻孔作业。
4、合理配置流量,系统节能省油
采用三联泵设计,对系统流量进行了合理配置,能耗只有风钻的1/3。
5、一分钟1米,3-10倍的工作效率
钻臂动作速度均匀平衡爬行;液压凿岩机凿岩进度快,F=7.6度的岑溪红(花岗岩)上钻孔速度每分钟在800-1000mm以上,其工作效率是风钻的3-10倍。
6、环保设计,保证空气的质量
集尘器能有效的分离尘渣,收集粉尘,保证施工环境的空气质量。
Advantages
1. Integrated function
Integrated power, drilling, walking and slagging as a whole. Multiple functions, smart Which improve the working efficiency.
2. Fully hydraulic working and all-day assaults.
Completely independent research and development, rely fully hydraulic operation system to meet outdoor, underground and tunnel working requirements.
3. Multi-angle drilling , challenge the limits of space operations
Can move freely, multi-form compositions, The arms can move up and down, front and back, left and right smartly to realize the drilling operations at any angles in three-dimensional space.
4. Distribute the oil flow reasonablely and save the energy
Adopted the triple pump to realize the reasonable oil flow, the energy consumption is only 1/3 of pneumatic drill.
5. One meter per minute, three to ten times working efficiency
Working stable and fast, when drilling the rigidity of 7.6 ranite, the speed can reach up to 800-1000mm/min, the working efficiency is 3 to 10 times of pneumatic drill.
6. Environmental protection design to make sure of the air quality
The dust collector can separate and collect dust effectively, ensure the air quality under working condition.

 

分享到:
上一篇:ZL-C28 露天折叠臂液压凿岩台车 下一篇:没有了